#ENDER 3 ULTIMAKER CURA SETTINGS HOW TO#
#ENDER 3 ULTIMAKER CURA SETTINGS INSTALL#

While this is technically true, you can achieve much better prints and run into fewer problems if you use a heated bed. Most manufacturers of PLA filament state that you can print parts without using a heated bed. If you ever have any bed adhesion issues, the bed temperature is a great tool that you can use to fix them, which is why it’s such an important setting to get right. Bed Temperature Source: Youtube HavocBuilds I recommend starting on the low end (205 ☌) and increasing it if you see any signs of under-extrusion. A 40 ☌ range of freedom is just way too much, so I’ve narrowed it down to just 5 ☌.Ģ05-210 ☌ works for every different brand of regular PLA filament I’ve ever used, providing enough heat to properly melt the filament and make parts strong, but not too much to where over-extrusion occurs. On the side of most PLA filament spools, you’ll find a suggested range between 180-220 ☌. But you can’t go too low or else you’ll experience under-extrusion, where the layers of the print have gaps and aren’t what they’re supposed to be. This will leave your model with unwanted marks and blobs along the exterior surface. Too high of a hot end temperature will cause over-extrusion because the excess heat will push an excess filament out of the nozzle. I consider this setting the single most important setting of any slicer profile because it directly impacts the extrusion of filament, which is how 3D printed parts are actually printed. The first setting is the hot end temperature, which I also call the nozzle temperature. In the following sections, I’ll go over each main setting and why I have it at the value I suggested. Slight modifications may need to be made for other printers or when using special blends of PLA filament like wood PLA. As I mentioned, these settings are meant for the Ender 3 (Pro/V2/S1) when printing regular PLA filament. Now for what we’ve all been waiting for (or at least me): the explanation of the settings I suggested in the earlier section. If, for some reason, your specific version isn’t there, just click another version of the Ender 3 because the slicer profiles for the original, Pro, and V2 are basically the same.Īnd that’s it! Best Cura Settings for the Ender 3 (V2/Pro/S1)

Then, after skipping through the tutorial, click “Add Printer” and look for the “Creality” category.Ĭlick the drop-down arrow next to “Creality” and find your version of the Ender 3.

#ENDER 3 ULTIMAKER CURA SETTINGS INSTALL#

So, first you’ll want to install Ultimaker Cura (it’s free!) from the download page on Ultimaker’s website. And, because the Ender 3 is so popular, there’s a pre-made slicer profile for the original Ender 3, Ender 3 Pro, Ender 3 V2, and Ender 3 S1. Luckily, Cura is open-source, meaning it is, to some degree, developed by the community.

#ENDER 3 ULTIMAKER CURA SETTINGS HOW TO#

How to Set Up Cura for the Ender 3?īefore we get into the explanations, though, it helps to learn how to set up Cura for your 3D printer, which, in this case, is the Ender 3 (Pro/V2/S1). So, if you don’t have time to read the explanations of why I have each setting at what value, take this and get started! I promise you’ll love it! But, for those a little more interested…or skeptical… read on as I explain how I landed on the values I did. So let’s just get to the point: what is the perfect slicer profile for printing PLA on the Ender 3? In the bullet points below, we’ve debriefed the main settings so you can quickly copy them into your Ultimaker Cura slicer profile and start printing.

Best Cura Settings for the Ender 3 (V2/Pro/S1).

What is the Perfect Ender 3 PLA Profile?.

I’ve personally spent years and many spools of filament fine tuning this profile so that you don’t have to. I can assure you that, if your printer is built right and your filament isn’t terrible, these settings will bring you amazing prints. In this article, I’ll go over the best Cura settings for the original Ender 3, Ender 3 Pro, Ender 3 V2, and Ender 3 S1. Orrrrrr…you can copy the slicer settings of someone else who went through this very intensive process. But, if you want to take your models to the next level in terms of quality, you have to spend hours and hours tuning your settings. If you just use the default slicer settings, such as the one that Cura offers for the Ender 3 (Pro/V2), your prints will come out fine.

The more settings you control, the more complex the tuning process becomes, but also the higher quality your models can be. Every time you change a setting, the resulting model will also slightly change. Instead, you have to fiddle around with different printing parameters, known as slicer settings, which control how your model is printed. Wouldn’t it just be terrific if you could send a model to your 3D printer and it comes out perfectly?

Ender 3 ultimaker cura settings